Moog IPRS01 Instruções de Operação descarregar pdf (Página 7)

Figure 7: Active Solid-State Relay I/O

Detect Connection

The hardware installation depends upon the desired operating mode - Timed Reset Mode or Intelligent Reset Mode.

Timed Reset Mode Installation

Hardware Installation

IP RESET

1. Do not connect I/O Detect cable. Instead, twist wires together with provided wire nut.

2. Connect the power output pin from the IP Reset to the Power input on your device

3. Connect the power from the transformer to the power input in the IP Reset.

4. No IP Reset Manager Software installation is necessary.

Your IP Reset STD is now connected in Timed Mode. Your protected device should be operating and

power reset once every 12 hours.

IP Reset® Intelligent Reset Mode Installation

Operating the IP Reset® Intelligent Reset Mode requires an output connection to the protected device via the I/O Detect cable. The below illustrates the typical

connections for Intelligent Reset Mode

! WARNING !

If Intelligent Reset Mode connection is incorrect and IP Reset® does not detect I/O communication, IP Reset will remain in Timed Reset Mode and re-start your

device once every 12 hours.

IP RESET

1. Locate your camera in the IP Camera Compatability Chart (Appendix A). If your camera is not

listed, please contact Videolarm at (800)-554-1124.

2. Connect the Brown I/O Detect wire to the I/O terminal specied for your device.

3. Connect the Black I/O Detect wire to the I/O terminal specied for your device.

4. Connect the power output pin from the IP Reset to the Power input on your device.

5. Connect the power from the transformer to the power input in the IP Reset.

6. Add your device’s conguration to the IP Reset Manager Software or Network video recording

(NVR) software (See IP Reset Manager Software installation in CD-ROM).

Note 1: Connection polarity MUST be observed for all devices.

Note 2: If the input connections need to be modied, the Brown wire is plus VDC and the Black

wire is ground (0 VDC).

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentários a estes Manuais

Sem comentários

Moog IPRS01 Instruções de Operação Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Moog IPRS01