Moog QOD SERIES Instruções de Operação descarregar pdf (Página 5)

CAMERA SETTINGS

SERIAL NUMBERS BEGINNING WITH YK

FIXED AND FIXED VARI-FOCAL LENSES. There are no user adjustable settings on

these units (Figure 4).

Figure 4

AUTO IRIS LENSES. The dip switches are factory set with AES off and backlight

compensation on (Figure 5). The auto iris is also set at the factory, but an adjustment

screw is included for use if needed. See page 10 for instructions on adjusting Auto Iris.

Auto Iris

adjustment

screw

AES Default Off

Backlight

Compensation

Default On

Figure 5

BW Fixed and Vari-Focal

BW Auto Iris

NOTE: To determine which camera is used in your unit, locate the serial number

on the inside of the housing. Match the two letter prex with the corresponding

instructions included here for adjustments.

The operational settings for the camera are dened by ten dip switches located on the

PC Board (Figure 6). Moving the switches to the on position will activate each setting.

Factory defaults are pictured below (Figure 7 and 8).

FACTORY DEFAULT FIXED AND FIXED VARI-FOCAL LENSES: Dip Switches 5

and 7 on, all others off.

Figure 7

FACTORY DEFAULT AUTO IRIS LENSES:

Dip Switches 3, 5 and 7 on, all others off.

Figure 8

Figure 6

Hi-Res Color, Fixed and Vari-focal xed lenses

Dip Switches

Auto Iris

adjustment

screw

DO NOT

ADJUST

Factory

Use Only

Connection to

Power Board

NOTE: Dip switches are factory pre-set for optimum performance.

In certain specic instances it may be necessary to adjust

one or more settings. Consult a qualied technician before

making any adjustments. A Dip Switch settings chart is

available on the next page.

SERIAL NUMBERS BEGINNING WITH MC

Vari-Focal Lens: First, adjust the Magnication Lock Screw to the desired

magnication (telephoto to wide angle). Tighten the Lock Screw. Next, adjust the

Focus Lock Screw until a clear picture is achieved. Tighten the Lock Screw (Figure 3).

Figure 3

Magnication lock screw Focus lock screw

Fixed iris vari-focal

lens

Auto Iris Lens:

NOTE: THE AUTO IRIS LENS IS SET AT THE FACTORY.

• IF YOU EXPERIENCE VIDEO TOO LIGHT OR DARK

AUTO IRIS ADJUSTMENT MAY BE NEEDED.

SEE THE TROUBLESHOOTING SECTION FOR

ADJUSTMENT INFORMATION.

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Moog QOD SERIES Instruções de Operação Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Moog QOD SERIES